Firewire problem 1
I have been using Kino and Cinelerra for almost a year. Until now, I never had to export video to tape. At this moment I am working on a video project that requires me to do that, so I have been trying to get the export settings in Kino to work. Replacing the default dv1394 export settings: /dev/ieee1394/dv/host0/PAL/out with /dev/dv1394-0 seemed to work, it actually gave sound and image export to camera.
After a good night sleep with lots of happy ieee dreams, I switched on my computer in the morning to do some work and found that all firewire functionality was down. No more camera recognition or even external firewire external disks.
At the moment I’m still struggeling getting my firewire back to work. I’m not super confident in understanding ieee1394 issues, so I hope that posting about this will give me some material to fall back to next time a similar thing might happen.
In the previous post about this, I am referring to BXLUG tip how to get kino’s import through the raw1394 module to work.
I found that these tips are relevant for Hoary, not for Dapper. The writer of this page on Ubuntu Community Documentation https://help.ubuntu.com/community/Firewire outlines that in Ubuntu 6.06
“The device file (also called a node) which acts as an interface between Kino, Firewire and your camera can be one of:
*/dev/dv1394/0 (gives access to Firewire for video capture but not to the camera’s controls)
*/dev/raw1394 (gives raw access to Firewire and allows access to your cameras controls, but poses a security risk)
When you connect your camera and turn it on udev should create one or more of the device files needed,
This is different from Ubuntu 5.04 (Hoary) where
“The module you need for capturing from Firewire are built into the Linux kernel, but 5.04 doesn’t create the device files automatically when you plug your camera in. To make the device files you need to edit /etc/modules as root.”
Adding raw1394 and video1394 to the modules list solves that.
When I installed Ubuntu 6.06 one of the first things I did was adding the modules to the /etc/modules, as I had done before in the 5.04 and 5.10 Ubuntu versions. In the beginning that worked fine, just as before.
After reading that adding the nodes to the modules list would no longer be necessary, I suspected I had messed up something by doing just that, and after far too much time wasted on trials and errors, I decided to do a clean install of the system. New kernel, erasing any messed up files obstructing the ieee input.
Strangely enough this did not change anything: both camera and firewire external disks still remain unrecognised.
here’s my dmesg output:
$ dmesg
[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 – 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 – 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e4000 – 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 – 000000003ffb0000 (usable)
[17179569.184000] BIOS-e820: 000000003ffb0000 – 000000003ffc0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ffc0000 – 000000003fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff0000 – 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffc0000 – 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262064
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32688 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f9860
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000504 MSFT 0x00000097) @ 0x3ffb0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x07000504 MSFT 0x00000097) @ 0x3ffb0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x07000504 MSFT 0x00000097) @ 0x3ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x07000504 MSFT 0x00000097) @ 0x3ffc0040
[17179569.184000] ACPI: DSDT (v001 75V8p 75V8p001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2926.201 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80×25
[17179571.896000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.900000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179571.944000] Memory: 1028564k/1048256k available (1976k kernel code, 18932k reserved, 606k data, 288k init, 130752k highmem)
[17179571.944000] Checking if this processor honours the WP bit even in supervisor mode… Ok.
[17179572.024000] Calibrating delay using timer specific routine.. 5855.21 BogoMIPS (lpj=11710438)
[17179572.024000] Security Framework v1.0.0 initialized
[17179572.024000] SELinux: Disabled at boot.
[17179572.024000] Mount-cache hash table entries: 512
[17179572.024000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
[17179572.024000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
[17179572.024000] monitor/mwait feature present.
[17179572.024000] using mwait in idle threads.
[17179572.024000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.024000] CPU: L2 cache: 1024K
[17179572.024000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d 00000000 00000000
[17179572.024000] mtrr: v2.0 (20020519)
[17179572.024000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[17179572.024000] Enabling fast FPU save and restore… done.
[17179572.024000] Enabling unmasked SIMD FPU exception support… done.
[17179572.024000] Checking ‘hlt’ instruction… OK.
[17179572.040000] checking if image is initramfs… it is
[17179572.560000] Freeing initrd memory: 6616k freed
[17179572.568000] ACPI: Looking for DSDT … not found!
[17179572.572000] ENABLING IO-APIC IRQs
[17179572.572000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.716000] NET: Registered protocol family 16
[17179572.716000] EISA bus registered
[17179572.716000] ACPI: bus type pci registered
[17179572.716000] PCI: Using configuration type 1
[17179572.716000] ACPI: Subsystem revision 20051216
[17179572.720000] ACPI: Interpreter enabled
[17179572.720000] ACPI: Using IOAPIC for interrupt routing
[17179572.720000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.720000] PCI: Probing PCI hardware (bus 00)
[17179572.724000] Boot video device is 0000:01:00.0
[17179572.724000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.740000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179572.740000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179572.740000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179572.740000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.740000] pnp: PnP ACPI init
[17179572.748000] pnp: PnP ACPI: found 12 devices
[17179572.748000] PnPBIOS: Disabled by ACPI PNP
[17179572.748000] PCI: Using ACPI for IRQ routing
[17179572.748000] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
[17179572.748000] PCI: Bridge: 0000:00:01.0
[17179572.748000] IO window: b000-bfff
[17179572.748000] MEM window: ffd00000-ffdfffff
[17179572.748000] PREFETCH window: d7f00000-f7efffff
[17179572.748000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.748000] audit: initializing netlink socket (disabled)
[17179572.748000] audit(1161249278.748:1): initialized
[17179572.748000] highmem bounce pool size: 64 pages
[17179572.748000] VFS: Disk quotas dquot_6.5.1
[17179572.748000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.748000] Initializing Cryptographic API
[17179572.748000] io scheduler noop registered
[17179572.748000] io scheduler anticipatory registered
[17179572.748000] io scheduler deadline registered
[17179572.748000] io scheduler cfq registered
[17179572.748000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179572.748000] isapnp: Scanning for PnP cards…
[17179573.100000] isapnp: No Plug & Play device found
[17179573.116000] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[17179573.116000] PNP: PS/2 controller doesn’t have KBD irq; using default 1
[17179573.116000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.116000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.116000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.116000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.120000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.120000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.120000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.120000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.120000] mice: PS/2 mouse device common for all mice
[17179573.120000] EISA: Probing bus 0 at eisa.0
[17179573.120000] EISA: Detected 0 cards.
[17179573.120000] NET: Registered protocol family 2
[17179573.160000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.160000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179573.160000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.160000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.160000] TCP reno registered
[17179573.160000] TCP bic registered
[17179573.160000] NET: Registered protocol family 1
[17179573.160000] NET: Registered protocol family 8
[17179573.160000] NET: Registered protocol family 20
[17179573.160000] Using IPI Shortcut mode
[17179573.160000] ACPI wakeup devices:
[17179573.160000] PCI0 PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI VUSB ILAN
[17179573.160000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.160000] Freeing unused kernel memory: 288k freed
[17179573.204000] vga16fb: initializing
[17179573.204000] vga16fb: mapped to 0xc00a0000
[17179573.304000] Console: switching to colour frame buffer device 80×25
[17179573.304000] fb0: VGA16 VGA frame buffer device
[17179574.432000] Capability LSM initialized
[17179574.464000] ACPI: Processor [CPU1] (supports 16 throttling states)
[17179574.952000] SCSI subsystem initialized
[17179574.956000] ACPI: bus type scsi registered
[17179574.956000] libata version 1.20 loaded.
[17179574.956000] sata_via 0000:00:0f.0: version 1.1
[17179574.956000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179574.956000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
[17179574.956000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179574.956000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
[17179574.956000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
[17179576.328000] scsi0 : sata_via
[17179577.496000] scsi1 : sata_via
[17179577.508000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179577.508000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179577.508000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179577.508000] VP_IDE: chipset revision 6
[17179577.508000] VP_IDE: not 100% native mode: will probe irqs later
[17179577.508000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179577.508000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[17179577.508000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179577.508000] Probing IDE interface ide0…
[17179577.924000] hda: Maxtor 6L160P0, ATA DISK drive
[17179578.204000] hdb: Maxtor 6L160P0, ATA DISK drive
[17179578.264000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179578.308000] Probing IDE interface ide1…
[17179579.172000] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179579.508000] ide1 at 0x170-0x177,0x376 on irq 15
[17179579.516000] hda: max request size: 1024KiB
[17179579.528000] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179579.528000] hda: cache flushes supported
[17179579.528000] hda: hda1 hda2 < hda5 >
[17179579.552000] hdb: max request size: 1024KiB
[17179579.552000] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179579.556000] hdb: cache flushes supported
[17179579.556000] hdb: hdb1
[17179579.564000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179579.564000] Uniform CD-ROM driver Revision: 3.20
[17179579.856000] ieee1394: Initialized config rom entry `ip1394′
[17179579.856000] ohci1394: $Rev: 1313 $ Ben Collins
[17179579.856000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
[17179579.856000] ohci1394: fw-host0: Unexpected PCI resource length of 1000!
[17179579.904000] ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
[17179580.008000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[ffe7e000-ffe7e7ff] Max Packet=[2048]
[17179580.008000] ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
[17179580.120000] usbcore: registered new driver usbfs
[17179580.120000] usbcore: registered new driver hub
[17179580.120000] USB Universal Host Controller Interface driver v2.3
[17179580.164000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
[17179580.164000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
[17179580.164000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179580.164000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179580.164000] uhci_hcd 0000:00:10.0: irq 185, io base 0x0000c000
[17179580.164000] hub 1-0:1.0: USB hub found
[17179580.164000] hub 1-0:1.0: 2 ports detected
[17179580.268000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
[17179580.268000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
[17179580.268000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179580.268000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179580.268000] uhci_hcd 0000:00:10.1: irq 185, io base 0x0000c400
[17179580.268000] hub 2-0:1.0: USB hub found
[17179580.268000] hub 2-0:1.0: 2 ports detected
[17179580.372000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
[17179580.372000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9
[17179580.372000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179580.372000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179580.372000] uhci_hcd 0000:00:10.2: irq 185, io base 0x0000c800
[17179580.372000] hub 3-0:1.0: USB hub found
[17179580.372000] hub 3-0:1.0: 2 ports detected
[17179580.476000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
[17179580.476000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9
[17179580.476000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179580.476000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179580.476000] uhci_hcd 0000:00:10.3: irq 185, io base 0x0000cc00
[17179580.476000] hub 4-0:1.0: USB hub found
[17179580.476000] hub 4-0:1.0: 2 ports detected
[17179580.508000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179580.580000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
[17179580.580000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 9
[17179580.580000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179580.580000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179580.580000] ehci_hcd 0000:00:10.4: irq 185, io mem 0xffeff800
[17179580.580000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.580000] hub 5-0:1.0: USB hub found
[17179580.580000] hub 5-0:1.0: 8 ports detected
[17179580.736000] Attempting manual resume
[17179580.780000] EXT3-fs: mounted filesystem with ordered data mode.
[17179580.796000] kjournald starting. Commit interval 5 seconds
[17179581.032000] usb 1-1: device not accepting address 2, error -71
[17179581.164000] ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
[17179582.668000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[17179582.808000] hub 1-1:1.0: USB hub found
[17179582.812000] hub 1-1:1.0: 3 ports detected
[17179583.160000] usb 1-2: new full speed USB device using uhci_hcd and address 5
[17179583.508000] usb 1-1.1: new full speed USB device using uhci_hcd and address 6
[17179587.780000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.784000] agpgart: Detected VIA PT880 chipset
[17179587.788000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179588.064000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179588.064000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179588.592000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.592000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.604000] usbcore: registered new driver hiddev
[17179588.608000] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input0
[17179588.608000] input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:10.0-1.1
[17179588.616000] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input1
[17179588.616000] input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:10.0-1.1
[17179588.616000] usbcore: registered new driver usbhid
[17179588.616000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179588.620000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179588.620000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201
[17179588.620000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[17179588.620000] eth0: VIA Rhine II at 0x1d400, 00:13:8f:27:b4:71, IRQ 201.
[17179588.620000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[17179588.844000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[17179588.844000] usbcore: registered new driver usblp
[17179588.844000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179588.952000] parport: PnPBIOS parport detected.
[17179588.952000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179588.996000] Floppy drive(s): fd0 is 1.44M
[17179589.004000] input: PC Speaker as /class/input/input2
[17179589.044000] FDC 0 is a post-1991 82077
[17179589.092000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
[17179589.092000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
[17179589.092000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179589.316000] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
[17179589.336000] Real Time Clock Driver v1.12
[17179589.624000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179589.640000] ts: Compaq touchscreen protocol output
[17179590.676000] NET: Registered protocol family 17
[17179590.784000] lp0: using parport0 (interrupt-driven).
[17179590.836000] sbp2: $Rev: 1306 $ Ben Collins
[17179590.836000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179590.836000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.956000] Adding 3028212k swap on /dev/hda5. Priority:-1 extents:1 across:3028212k
[17179591.220000] EXT3 FS on hda1, internal journal
[17179591.472000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179591.472000] md: bitmap version 4.39
[17179592.168000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179592.756000] NET: Registered protocol family 10
[17179592.756000] lo: Disabled Privacy Extensions
[17179592.756000] IPv6 over IPv4 tunneling driver
[17179593.376000] kjournald starting. Commit interval 5 seconds
[17179593.376000] EXT3 FS on hdb1, internal journal
[17179593.376000] EXT3-fs: mounted filesystem with ordered data mode.
[17179598.892000] ACPI: Power Button (FF) [PWRF]
[17179598.892000] ACPI: Power Button (CM) [PWRB]
[17179598.976000] ibm_acpi: ec object not found
[17179599.004000] pcc_acpi: loading…
[17179602.712000] [drm] Initialized drm 1.0.1 20051102
[17179602.740000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179602.740000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[17179603.120000] eth0: no IPv6 routers present
[17179603.348000] ppdev: user-space parallel port driver
[17179603.820000] apm: BIOS not found.
[17179603.848000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179603.848000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179603.852000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179604.196000] [drm] Setting GART location based on new memory map
[17179604.196000] [drm] Loading R200 Microcode
[17179604.196000] [drm] writeback test succeeded in 1 usecs
[17179607.240000] Bluetooth: Core ver 2.8
[17179607.240000] NET: Registered protocol family 31
[17179607.240000] Bluetooth: HCI device and connection manager initialized
[17179607.240000] Bluetooth: HCI socket layer initialized
[17179607.288000] Bluetooth: L2CAP ver 2.8
[17179607.288000] Bluetooth: L2CAP socket layer initialized
[17179607.332000] Bluetooth: RFCOMM socket layer initialized
[17179607.332000] Bluetooth: RFCOMM TTY layer initialized
[17179607.332000] Bluetooth: RFCOMM ver 1.7
[17179641.940000] ieee1394: raw1394: /dev/raw1394 device initialized
Posted on: Thursday, October 19, 2006
by: Peter in category: Hardware, Problems and solutions
[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 – 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 – 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e4000 – 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 – 000000003ffb0000 (usable)
[17179569.184000] BIOS-e820: 000000003ffb0000 – 000000003ffc0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000003ffc0000 – 000000003fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003fff0000 – 0000000040000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fffc0000 – 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262064
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 32688 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f9860
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000504 MSFT 0x00000097) @ 0x3ffb0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x07000504 MSFT 0x00000097) @ 0x3ffb0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x07000504 MSFT 0x00000097) @ 0x3ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x07000504 MSFT 0x00000097) @ 0x3ffc0040
[17179569.184000] ACPI: DSDT (v001 75V8p 75V8p001 0x00000001 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2926.201 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80×25
[17179571.896000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.900000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179571.944000] Memory: 1028564k/1048256k available (1976k kernel code, 18932k reserved, 606k data, 288k init, 130752k highmem)
[17179571.944000] Checking if this processor honours the WP bit even in supervisor mode… Ok.
[17179572.024000] Calibrating delay using timer specific routine.. 5855.21 BogoMIPS (lpj=11710438)
[17179572.024000] Security Framework v1.0.0 initialized
[17179572.024000] SELinux: Disabled at boot.
[17179572.024000] Mount-cache hash table entries: 512
[17179572.024000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
[17179572.024000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
[17179572.024000] monitor/mwait feature present.
[17179572.024000] using mwait in idle threads.
[17179572.024000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179572.024000] CPU: L2 cache: 1024K
[17179572.024000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d 00000000 00000000
[17179572.024000] mtrr: v2.0 (20020519)
[17179572.024000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[17179572.024000] Enabling fast FPU save and restore… done.
[17179572.024000] Enabling unmasked SIMD FPU exception support… done.
[17179572.024000] Checking ‘hlt’ instruction… OK.
[17179572.040000] checking if image is initramfs… it is
[17179572.560000] Freeing initrd memory: 6616k freed
[17179572.568000] ACPI: Looking for DSDT … not found!
[17179572.572000] ENABLING IO-APIC IRQs
[17179572.572000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179572.716000] NET: Registered protocol family 16
[17179572.716000] EISA bus registered
[17179572.716000] ACPI: bus type pci registered
[17179572.716000] PCI: Using configuration type 1
[17179572.716000] ACPI: Subsystem revision 20051216
[17179572.720000] ACPI: Interpreter enabled
[17179572.720000] ACPI: Using IOAPIC for interrupt routing
[17179572.720000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179572.720000] PCI: Probing PCI hardware (bus 00)
[17179572.724000] Boot video device is 0000:01:00.0
[17179572.724000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179572.740000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[17179572.740000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[17179572.740000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[17179572.740000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[17179572.740000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179572.740000] pnp: PnP ACPI init
[17179572.748000] pnp: PnP ACPI: found 12 devices
[17179572.748000] PnPBIOS: Disabled by ACPI PNP
[17179572.748000] PCI: Using ACPI for IRQ routing
[17179572.748000] PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
[17179572.748000] PCI: Bridge: 0000:00:01.0
[17179572.748000] IO window: b000-bfff
[17179572.748000] MEM window: ffd00000-ffdfffff
[17179572.748000] PREFETCH window: d7f00000-f7efffff
[17179572.748000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179572.748000] audit: initializing netlink socket (disabled)
[17179572.748000] audit(1161249278.748:1): initialized
[17179572.748000] highmem bounce pool size: 64 pages
[17179572.748000] VFS: Disk quotas dquot_6.5.1
[17179572.748000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179572.748000] Initializing Cryptographic API
[17179572.748000] io scheduler noop registered
[17179572.748000] io scheduler anticipatory registered
[17179572.748000] io scheduler deadline registered
[17179572.748000] io scheduler cfq registered
[17179572.748000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179572.748000] isapnp: Scanning for PnP cards…
[17179573.100000] isapnp: No Plug & Play device found
[17179573.116000] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[17179573.116000] PNP: PS/2 controller doesn’t have KBD irq; using default 1
[17179573.116000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179573.116000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179573.116000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179573.116000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.120000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179573.120000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179573.120000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179573.120000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179573.120000] mice: PS/2 mouse device common for all mice
[17179573.120000] EISA: Probing bus 0 at eisa.0
[17179573.120000] EISA: Detected 0 cards.
[17179573.120000] NET: Registered protocol family 2
[17179573.160000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.160000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179573.160000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.160000] TCP: Hash tables configured (established 262144 bind 65536)
[17179573.160000] TCP reno registered
[17179573.160000] TCP bic registered
[17179573.160000] NET: Registered protocol family 1
[17179573.160000] NET: Registered protocol family 8
[17179573.160000] NET: Registered protocol family 20
[17179573.160000] Using IPI Shortcut mode
[17179573.160000] ACPI wakeup devices:
[17179573.160000] PCI0 PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI VUSB ILAN
[17179573.160000] ACPI: (supports S0 S1 S3 S4 S5)
[17179573.160000] Freeing unused kernel memory: 288k freed
[17179573.204000] vga16fb: initializing
[17179573.204000] vga16fb: mapped to 0xc00a0000
[17179573.304000] Console: switching to colour frame buffer device 80×25
[17179573.304000] fb0: VGA16 VGA frame buffer device
[17179574.432000] Capability LSM initialized
[17179574.464000] ACPI: Processor [CPU1] (supports 16 throttling states)
[17179574.952000] SCSI subsystem initialized
[17179574.956000] ACPI: bus type scsi registered
[17179574.956000] libata version 1.20 loaded.
[17179574.956000] sata_via 0000:00:0f.0: version 1.1
[17179574.956000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[17179574.956000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
[17179574.956000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179574.956000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 0xDC00 irq 169
[17179574.956000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xDC08 irq 169
[17179576.328000] scsi0 : sata_via
[17179577.496000] scsi1 : sata_via
[17179577.508000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179577.508000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[17179577.508000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179577.508000] VP_IDE: chipset revision 6
[17179577.508000] VP_IDE: not 100% native mode: will probe irqs later
[17179577.508000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179577.508000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
[17179577.508000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[17179577.508000] Probing IDE interface ide0…
[17179577.924000] hda: Maxtor 6L160P0, ATA DISK drive
[17179578.204000] hdb: Maxtor 6L160P0, ATA DISK drive
[17179578.264000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179578.308000] Probing IDE interface ide1…
[17179579.172000] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179579.508000] ide1 at 0x170-0x177,0x376 on irq 15
[17179579.516000] hda: max request size: 1024KiB
[17179579.528000] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179579.528000] hda: cache flushes supported
[17179579.528000] hda: hda1 hda2 < hda5 >
[17179579.552000] hdb: max request size: 1024KiB
[17179579.552000] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(133)
[17179579.556000] hdb: cache flushes supported
[17179579.556000] hdb: hdb1
[17179579.564000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179579.564000] Uniform CD-ROM driver Revision: 3.20
[17179579.856000] ieee1394: Initialized config rom entry `ip1394′
[17179579.856000] ohci1394: $Rev: 1313 $ Ben Collins
[17179579.856000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 177
[17179579.856000] ohci1394: fw-host0: Unexpected PCI resource length of 1000!
[17179579.904000] ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
[17179580.008000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[ffe7e000-ffe7e7ff] Max Packet=[2048]
[17179580.008000] ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
[17179580.120000] usbcore: registered new driver usbfs
[17179580.120000] usbcore: registered new driver hub
[17179580.120000] USB Universal Host Controller Interface driver v2.3
[17179580.164000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
[17179580.164000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 9
[17179580.164000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179580.164000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179580.164000] uhci_hcd 0000:00:10.0: irq 185, io base 0x0000c000
[17179580.164000] hub 1-0:1.0: USB hub found
[17179580.164000] hub 1-0:1.0: 2 ports detected
[17179580.268000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
[17179580.268000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 9
[17179580.268000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179580.268000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179580.268000] uhci_hcd 0000:00:10.1: irq 185, io base 0x0000c400
[17179580.268000] hub 2-0:1.0: USB hub found
[17179580.268000] hub 2-0:1.0: 2 ports detected
[17179580.372000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
[17179580.372000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 9
[17179580.372000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179580.372000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179580.372000] uhci_hcd 0000:00:10.2: irq 185, io base 0x0000c800
[17179580.372000] hub 3-0:1.0: USB hub found
[17179580.372000] hub 3-0:1.0: 2 ports detected
[17179580.476000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
[17179580.476000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 9
[17179580.476000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179580.476000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179580.476000] uhci_hcd 0000:00:10.3: irq 185, io base 0x0000cc00
[17179580.476000] hub 4-0:1.0: USB hub found
[17179580.476000] hub 4-0:1.0: 2 ports detected
[17179580.508000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179580.580000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
[17179580.580000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 9
[17179580.580000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179580.580000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179580.580000] ehci_hcd 0000:00:10.4: irq 185, io mem 0xffeff800
[17179580.580000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179580.580000] hub 5-0:1.0: USB hub found
[17179580.580000] hub 5-0:1.0: 8 ports detected
[17179580.736000] Attempting manual resume
[17179580.780000] EXT3-fs: mounted filesystem with ordered data mode.
[17179580.796000] kjournald starting. Commit interval 5 seconds
[17179581.032000] usb 1-1: device not accepting address 2, error -71
[17179581.164000] ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
[17179582.668000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[17179582.808000] hub 1-1:1.0: USB hub found
[17179582.812000] hub 1-1:1.0: 3 ports detected
[17179583.160000] usb 1-2: new full speed USB device using uhci_hcd and address 5
[17179583.508000] usb 1-1.1: new full speed USB device using uhci_hcd and address 6
[17179587.780000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.784000] agpgart: Detected VIA PT880 chipset
[17179587.788000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179588.064000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179588.064000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179588.592000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.592000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.604000] usbcore: registered new driver hiddev
[17179588.608000] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input0
[17179588.608000] input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:10.0-1.1
[17179588.616000] input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input1
[17179588.616000] input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:10.0-1.1
[17179588.616000] usbcore: registered new driver usbhid
[17179588.616000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179588.620000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[17179588.620000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201
[17179588.620000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[17179588.620000] eth0: VIA Rhine II at 0x1d400, 00:13:8f:27:b4:71, IRQ 201.
[17179588.620000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[17179588.844000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[17179588.844000] usbcore: registered new driver usblp
[17179588.844000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179588.952000] parport: PnPBIOS parport detected.
[17179588.952000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179588.996000] Floppy drive(s): fd0 is 1.44M
[17179589.004000] input: PC Speaker as /class/input/input2
[17179589.044000] FDC 0 is a post-1991 82077
[17179589.092000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 209
[17179589.092000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
[17179589.092000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179589.316000] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
[17179589.336000] Real Time Clock Driver v1.12
[17179589.624000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179589.640000] ts: Compaq touchscreen protocol output
[17179590.676000] NET: Registered protocol family 17
[17179590.784000] lp0: using parport0 (interrupt-driven).
[17179590.836000] sbp2: $Rev: 1306 $ Ben Collins
[17179590.836000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179590.836000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.956000] Adding 3028212k swap on /dev/hda5. Priority:-1 extents:1 across:3028212k
[17179591.220000] EXT3 FS on hda1, internal journal
[17179591.472000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179591.472000] md: bitmap version 4.39
[17179592.168000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179592.756000] NET: Registered protocol family 10
[17179592.756000] lo: Disabled Privacy Extensions
[17179592.756000] IPv6 over IPv4 tunneling driver
[17179593.376000] kjournald starting. Commit interval 5 seconds
[17179593.376000] EXT3 FS on hdb1, internal journal
[17179593.376000] EXT3-fs: mounted filesystem with ordered data mode.
[17179598.892000] ACPI: Power Button (FF) [PWRF]
[17179598.892000] ACPI: Power Button (CM) [PWRB]
[17179598.976000] ibm_acpi: ec object not found
[17179599.004000] pcc_acpi: loading…
[17179602.712000] [drm] Initialized drm 1.0.1 20051102
[17179602.740000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[17179602.740000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[17179603.120000] eth0: no IPv6 routers present
[17179603.348000] ppdev: user-space parallel port driver
[17179603.820000] apm: BIOS not found.
[17179603.848000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[17179603.848000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[17179603.852000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[17179604.196000] [drm] Setting GART location based on new memory map
[17179604.196000] [drm] Loading R200 Microcode
[17179604.196000] [drm] writeback test succeeded in 1 usecs
[17179607.240000] Bluetooth: Core ver 2.8
[17179607.240000] NET: Registered protocol family 31
[17179607.240000] Bluetooth: HCI device and connection manager initialized
[17179607.240000] Bluetooth: HCI socket layer initialized
[17179607.288000] Bluetooth: L2CAP ver 2.8
[17179607.288000] Bluetooth: L2CAP socket layer initialized
[17179607.332000] Bluetooth: RFCOMM socket layer initialized
[17179607.332000] Bluetooth: RFCOMM TTY layer initialized
[17179607.332000] Bluetooth: RFCOMM ver 1.7
[17179641.940000] ieee1394: raw1394: /dev/raw1394 device initialized
Recent Comments